Console 2

Console with slanted panel and service hatches


Layouts generated:

Settings for Finger Joints

style style of the fingers
surroundingspaces minimal space at the start and end in (multiple of normal spaces)
edge_width space below holes of FingerHoleEdge (multiples of thickness)
extra_length extra material to grind away burn marks (multiples of thickness)
finger width of the fingers (multiples of thickness)
play extra space to allow finger move in and out (multiples of thickness)
space space between fingers (multiples of thickness)
width width of finger holes (multiples of thickness)

Settings for Stackable Edges

angle inside angle of the feet
height height of the feet (multiples of thickness)
holedistance distance from finger holes to bottom edge (multiples of thickness)
width width of the feet (multiples of thickness)

Main Settings

x inner width in mm (unless outside selected)
y inner depth in mm (unless outside selected)
h inner height in mm (unless outside selected)
bottom_edge edge type for bottom edge
outside treat sizes as outside measurements
front_height height of the front below the panel in mm
angle angle of the front panel (90°=upright)
removable_backwall have latches at the backwall
removable_panel The panel is held by tabs and can be removed
glued_panel the panel is glued and not held by finger joints

Default Settings

thickness thickness of the material in mm
format format of resulting file
tabs width of tabs holding the parts in place in mm (not supported everywhere)
debug print surrounding boxes for some structures
labels label the parts (where available)
reference print reference rectangle with given length in mm (zero to disable)
inner_corners style for inner corners
burn burn correction in mm (bigger values for tighter fit)

Online Box generator :: Console 2 - Console with slanted panel and service hatches