Storage Shelf

StorageShelf can be used to store Typetray

This is a simple shelf box.

Viewed:

Layouts generated:

Settings for Finger Joints

angle
style style of the fingers
surroundingspaces minimal space at the start and end in (multiple of normal spaces)
edge_width space below holes of FingerHoleEdge (multiples of thickness)
extra_length extra material to grind away burn marks (multiples of thickness)
finger width of the fingers (multiples of thickness)
play extra space to allow finger move in and out (multiples of thickness)
space space between fingers (multiples of thickness)
width width of finger holes (multiples of thickness)

Settings for Stackable Edges

angle inside angle of the feet
height height of the feet (multiples of thickness)
holedistance distance from finger holes to bottom edge (multiples of thickness)
width width of the feet (multiples of thickness)

Settings for Hinges and HingePins

grip_percentage
outset have lid overlap at the sides (similar to OutSetEdge)
pinwidth set to lower value to get disks surrounding the pins
style "outset" or "flush"
axle diameter of the pin hole (multiples of thickness)
grip_length fixed length of the grips on he lids (multiples of thickness)
hingestrength thickness of the arc holding the pin in place (multiples of thickness)

Settings for Cabinet Hinges

bore diameter of the pin hole in mm
eyes_per_hinge pieces per hinge
hinges number of hinges per edge
style style of hinge used
eye radius of the eye (multiples of thickness)
play space between eyes (multiples of thickness)
spacing minimum space around the hinge (multiples of thickness)

Settings for Slide-on Lids

angle
hole_width width of the "finger hole" in mm
second_pin additional pin for better positioning
spring position(s) of the extra locking springs in the lid
style style of the fingers
surroundingspaces minimal space at the start and end in (multiple of normal spaces)
edge_width space below holes of FingerHoleEdge (multiples of thickness)
extra_length extra material to grind away burn marks (multiples of thickness)
finger width of the fingers (multiples of thickness)
play extra space to allow finger move in and out (multiples of thickness)
space space between fingers (multiples of thickness)
width width of finger holes (multiples of thickness)

Settings for Click-on Lids

angle angle of the hooks bending outward
bottom_radius radius at the bottom (multiples of thickness)
depth length of the hooks (multiples of thickness)

Settings for RoundedTriangleEdge

height height above the wall
r_hole radius of hole
radius radius of top corner
outset extend the triangle along the length of the edge (multiples of thickness)

Settings for Mouning Edge

d_head head diameter of mounting screw in mm
d_shaft shaft diameter of mounting screw in mm
margin minimum space left and right without holes (fraction of the edge length)
num number of mounting holes (integer)
side side of box (not all valid configurations make sense...)
style edge style

Main Settings

x inner width in mm (unless outside selected)
sy sections back to front in mm
sh sections bottom to top in mm
outside treat sizes as outside measurements
bottom_edge edge type for bottom edge
top_edge edge type for top edge
retainer height of retaining wall at the front edges
retainer_hole_edge use finger hole edge for retainer walls

Default Settings

thickness thickness of the material in mm
format format of resulting file
tabs width of tabs holding the parts in place in mm (not supported everywhere)
debug print surrounding boxes for some structures
labels label the parts (where available)
reference print reference rectangle with given length in mm (zero to disable)
inner_corners style for inner corners
burn burn correction in mm (bigger values for tighter fit)

Online Box generator :: Storage Shelf - StorageShelf can be used to store Typetray