SBC Micro Rack

Stackable rackable racks for SBC Pi-Style Computers

Viewed:

Layouts generated:

Settings for Finger Joints

angle
style style of the fingers
surroundingspaces minimal space at the start and end in (multiple of normal spaces)
edge_width space below holes of FingerHoleEdge (multiples of thickness)
extra_length extra material to grind away burn marks (multiples of thickness)
finger width of the fingers (multiples of thickness)
play extra space to allow finger move in and out (multiples of thickness)
space space between fingers (multiples of thickness)
width width of finger holes (multiples of thickness)

Settings for Stackable Edges

angle inside angle of the feet
height height of the feet (multiples of thickness)
holedistance distance from finger holes to bottom edge (multiples of thickness)
width width of the feet (multiples of thickness)

Main Settings

x inner width in mm
y inner depth in mm
sbcs how many slots for sbcs
clearance_x clearance for the board in the box (x) in mm
clearance_y clearance for the board in the box (y) in mm
clearance_z SBC Clearance in mm
hole_dist_edge hole distance from edge in mm
hole_grid_dimension_x width of x hole area
hole_grid_dimension_y width of y hole area
hole_diameter hole diameters
netusb_z height of the net/usb hole mm
netusb_x width of the net/usb hole in mm
stable draw some holes to put a 1/4" dowel through at the base and top
switch adds an additional vertical segment to hold the switch in place, works best w/ --stable

Default Settings

thickness thickness of the material in mm
format format of resulting file
tabs width of tabs holding the parts in place in mm (not supported everywhere)
debug print surrounding boxes for some structures
labels label the parts (where available)
reference print reference rectangle with given length in mm (zero to disable)
inner_corners style for inner corners
burn burn correction in mm (bigger values for tighter fit)

Online Box generator :: SBC Micro Rack - Stackable rackable racks for SBC Pi-Style Computers